TR 700
Description:
The TR 700 lets you apply hot-melt adhesive as dots and lines. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue. The working-temperature of the glue applicator is controlled by a thermostat and set to 120 °C. The TR 700 glue gun uses 310 ml aluminium hot-melt glue cartridges, which for instance can contain PUR-hot-melt glue or POR-hot-melt adhesive. The cartridges can be swapped easily and hassle-free. The optional cartridge pre-heater KVG heats up the glue before use and increases the possible glue output per hour. The number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.
Technical description:
Device weight | 1070g |
Power supply | 230 V (50Hz), 1,75A |
Power consumption | 230 V: 400 Watt |
| Protection class | I, IP 30 |
Temperature control, display | Thermostat, none |
| Temperature limitation | Temperature monitor |
Operating temperature | 120 °C |
| Temperature constancy | ± 5°C |
Heat-up time | ca. 3-10min. |
Gross capacity | 310 ml |
Conveyor system | Air pressure |
Operating pressure | 0,5-6 bar |
Length of electrical connection | 8,5m |
| Air hose length | 5 m |
| Length connection set | 3 m |
| Recommended melting goods | Hot-melts in 310ml alu cartridges |
| Weboldalunk sütiket (cookie) használ. A honlap további használatával hozzájárul a sütik használatához
További információk: Adatkezelési tájékoztató |
Elfogadom
|